Step-by-Step Guide to Decorating with Removable Wallpaper

Applying peel and stick wall paper is an accessible DIY project that can quickly change the look of a room. This temporary wall paper is famously forgiving, making it perfect for beginners and renters alike. To achieve a professional-looking finish, follow this simple step-by-step guide for a smooth and successful application.

Step 1: Preparation is Key

Before you begin, proper wall preparation is essential for ensuring the removable wall paper adheres correctly. Start by washing the wall with a mild cleaner to remove any dust or grime, then let it dry completely. Remove all outlet covers and light switch plates. If you have any holes or significant imperfections on the wall, fill them with spackle, sand them smooth, and wipe away the dust.

Step 2: Measure and Cut Your First Panel

Measure the height of your wall from the ceiling to the baseboard. Unroll your wallpaper and cut your first panel, adding four to five extra inches to the total length. This excess gives you room for error and trimming. When cutting subsequent panels, be sure to account for the pattern repeat to ensure the design will line up perfectly. This is an important step when working with many Removable Wallpaper Ideas.

Step 3: Application and Smoothing

Begin by peeling about 12 inches of the backing from the top of your first panel. Align the top edge of the wallpaper with the ceiling line, allowing a couple of inches of excess to overlap. Press the exposed adhesive firmly onto the wall. Working from the top down, continue to pull the backing away in small sections while using a smoothing tool or a flat hand to press the paper onto the wall. Work from the center outwards to push out any air bubbles. When applying a Floral Removable Wallpaper, pay close attention to the alignment of the blossoms.

Step 4: Aligning Panels and Final Trims

For your second panel, carefully align its pattern with the edge of the first panel already on the wall. Overlap the panels slightly if the manufacturer's instructions recommend it, which is common for a seamless look. Repeat the application and smoothing process. Once all panels are in place, use a sharp craft knife and a straight edge to carefully trim the excess paper at the ceiling and baseboard. The wallpaper removable quality allows for minor repositioning if needed. Finally, re-install your outlet covers for a finished look. This easy to remove wallpaper makes the entire project manageable.