Prepare Your Walls

Begin by cleaning the wall surface. Use a damp cloth to remove any dust or grime. Ensure the wall is completely dry before proceeding. This step is crucial for proper adhesion of the temporary wallpaper.

Measure and Cut

Carefully measure the area you plan to cover. Transfer these measurements to the back of your peel and stick wallpaper. Most rolls have grid lines to assist with accurate cutting. Use a sharp utility knife or scissors to cut the panels to the required size. Remember to account for any patterns that need aligning.

Peel and Apply

Peel away a few inches of the backing from the top of the removable wallpaper. Align the top edge of the wallpaper panel with the top of your wall. Gradually peel away the remaining backing while smoothing the wallpaper onto the wall. Use a smoothing tool or a clean, dry cloth to press out any air bubbles as you go.

Align Subsequent Panels

If you are using multiple panels, carefully align the pattern of the next panel with the first. Overlap the edges slightly or butt them together, depending on the type of wallpaper for renters you have chosen. Smooth each panel as you apply it. For more detailed instructions, consider reading the ultimate guide to renter-friendly wallpaper.

Trim Excess Wallpaper

Once all panels are applied, trim any excess wallpaper at the top and bottom edges using your utility knife and a straight edge. Ensure you have a clean, straight line for a professional finish. This completes the application of your wallpaper for a temporary solution.

Removal Process

When it's time to move or change your decor, gently peel the renter friendly wallpaper from a top corner. Pull it down slowly and steadily, keeping it close to the wall. This method should prevent any damage to the underlying paint or wall surface. For further information on damage-free removal, refer to wallpapering your rental without losing your security deposit.